Spank-O-Matic Main PageSOM ProductsFrequently Asked QuestionsOrdering InformationSpanking LinksContact Information
Spank-O-Matic Knowledge Base: See -- Control -- Hear -- Compare -- Understand -- Enlighten

Spank-O-Matic is an Orgasm Alley Special Interest Site

The Ultimate Spanking Devices and Corporal Punishment Machines

Full Systems

The following full SOM II systems come complete, including a stand/bench, head unit, control system, and end effector. You need add only an air compressor, and the spanking begins! Consider additional end effectors and accessories farther down the page to meet your personal needs.

Spank-O-Matic II
The spanking machine against which all others are measured! This combination features the SOM II head unit, recommended for the vast majority of users, in combination with the heavier free-standing stand of welded steel.

On Sale Now!

more about the Spank-O-Matic II

Spank-O-Matic II XP
The most powerful spanking machine I'm willing to make, the SOM II XP delivers eXtra Power using a double-barrelled design and shares all the great features of the SOM II. Specialized to increased power with heavy end effectors for ultra-strong thuddy whacks.

more about the Spank-O-Matic II XP

Spank-O-Matic II LT
LT stands for Light... on your pocket! This lower-cost version of the SOM II uses the same head on a stand of assembled extrusion, and provides great functionality from a simplified hand control. Best spanker available on a budget.

Lower Cost Option -- On Sale Now!

more about the Spank-O-Matic II LT

SOM II Spanking Bench
Sexy, sleek, nicely adjustable, rock solid, and fully integrated with the SOM II system. The SOM Spanking Bench addresses the needs of those looking for an intelligently designed bench with integrated spanking machine. Components of the bench also build the LT stand. Bench available by itself as well.

more about the SOM II Spanking Bench

Accessories

I offer several major accessories and many end effectors that expand any of the SOM II systems above. In some cases, these may be ordered with the system (from the system's page) as a swap-out option or at a cost savings.

Spank-O-Matic II Automater
Whether you want to lay a blistering trail of cane strikes across your target or simply introduce variation in aim to your play, the Automater works with your SOM II machine to change the point of aim based on your instruction.

more about the Spank-O-Matic II Automater

SOM2PC Control System
After extensive development, the hardware and software to control your SOM II from your PC is available! Check out the features this control system provides today and in the near future.

more about the SOM2PC Control System

Timed Release Restraint System
The Timed Release Restraint System, or TRRS, uses a powerful electromagnet and timer to restrain and release its occupant. Limitless time, control from wall timer or PC (with SOM2PC system), and 600 pounds of retention force. Originally designed for use with the Bench, the TRRS is limited only by your imagination.

more about the Time Release Restraint System

End Effectors

Spank-O-Matic II End Effectors
Equip your Spank-O-Matic with a variety of end effectors to create different impact sensations, from stingy to thuddy.

more about Spank-O-Matic II End Effectors

Components

Each system component can be purchased individually, for example if you'd like to add a spanker head to your existing bench or pipe structure. If you're looking for a complete setup, you will see significant savings by ordering one of the systems above.

Click for larger view
Senco Compressor

Senco Compressor

The Senco PC1010 Air Compressor is one I recommend for the SOM II. It is a quiet (~67dB), oil-free, low maintenance compressor. Weighing is at 20 pounds and featuring a convenient carry handle, it is very portable. It comes pre-configured with pressure regulator and quick-connect fitting that mates directly to the SOM II air hose. This compressor is rated at .6 CFM @ 90 psi, and fully powers the SOM II for most levels of play. Please note that a larger compressor is recommended with the SOM II XP.

Senco PC1010 Compressor: $130

Click for larger view
15' Extension Hose w/ Fittings

15' Extension Hose w/ Fittings

While you can gain distance between the compressor and SOM II with a hose and fittings from any hardware store, this 15' air hose is a guaranteed fit and stylistic match to the stock hose. Adding this 15' hose means up to 23' from the SOM II to it's compressor.

15' Extension Hose: $25

Click for larger view
SOM II Hand Control

SOM II Hand Control

The SOM II Hand Control is the brains behind the machine, featuring full-fledged well marked user controls that drive the onboard computer. Requires one 9V battery, and delivers periodic 9 VDC output across pins 1 and 2 of a pro audio XLR plug. Drives both the SOM II and SOM II XP. Custom programming of one or more AUTO functions may be available, depending on your requirements... please contact me to discuss prior to purchase.

SOM II Hand Control: $200

Click for larger view
SOM II Head Unit

SOM II Head Unit

The standard head unit from the SOM II includes a valve/cylinder combination, driven by an onboard relay that accepts a 9 VDC signal across pins 1 and 2 of the attached pro audio XLR jack. Actuator arm accepts standard SOM II accessories, with two holes spaced 2" apart.

SOM II Head Unit: $325

Click for larger view
SOM II XP Head Unit

SOM II XP Head Unit

The XP head unit from the SOM II XP includes twin valve/cylinder combinations, driven by an onboard relay that accepts a 9 VDC signal across pins 1 and 2 of the attached pro audio XLR jack. Actuator arm accepts standard SOM II accessories, with two holes spaced 2" apart.

SOM II XP Head Unit: $525

Click for larger view
SOM II Stand

SOM II Stand

The standard SOM II welded steel stand comes complete from the ground to the 1" Schedule 40 stud. It consists of legs (2), base, vertical, and carriage, plus all of the hardware to assemble it. Includes four non-marking, non-slip rubber feet attached to the legs. All adjustments are continuously variable using hand knobs and channel nuts. Does not include pipe fitting.

SOM II Stand: $250

Click for larger view
SOM II LT Stand

SOM II LT Stand

The SOM II LT extruded aluminum stand comes complete from the ground to the 1" Schedule 40 stud. It consists of legs (2), base, vertical, and carriage, plus all of the hardware to assemble it. Includes four non-marking, non-slip rubber feet attached to the legs. All adjustments are continuously variable using t-bolts and 13mm nuts. Does not include pipe fitting.

SOM II LT Stand: $175

Click for larger view
SOM II Pipe Fitting

SOM II Pipe Fitting

The standard SOM II pipe fitting is a cast angle crossover fitting for 1" Sched 40 pipe. This fitting attaches the studs from the stand carriage and the SOM II head unit, and secures using a 3/16" hex key, not included. This fitting allows 360 degree adjustability in all dimensions and locks securely in position. Please note, current version uses two set screws per pipe, not one as shown, and the depicted hex key is not included.

SOM II Pipe Fitting: $15
Spank-O-Matic Main PageSOM ProductsFrequently Asked QuestionsOrdering InformationSpanking LinksContact Information
Plain Box Shipping
|
Satisfaction Guaranteed
|
100% Privacy
|
Global Delivery
View Your CartCredit Cards Accepted HereView Your Cart
Call Paul toll-free: (888)380-8840 Made with Pride in the USA

Find more fine handcrafted sex equipment at these other G&C sites:
Orgasm Alley: High Performance Sex Machines
Ballz: The Premier Steel Butt Toy System

All contents are ©Orgasm Alley, 2004-2012 or used with owner's permission, and may not be used without permission.
The purchase of items from Orgasm Alley indicates agreement that the owner of said items is solely responsible for the safe use thereof.